American Turbine HVLP Gravity Fed Gun for use with a Turbine. This gun gives you super smooth finishes and high transfer ratios.
American Turbine is a high quality HVLP manufacturer, providing guns, turbines, and other HVLP parts. If you've used Accuspray in the past but find it impossible to find any more, American Turbine is your solution. Many professionals are making the switch due to the lack of Accuspray products in the market.
These guns work best with the matching HVLP turbines, but can be used with others.
American Turbine Fluid Sets
Why do we recommend certain parts?
We recommend and automatically choose certain parts for you because more than 97% of our customers use this setup for their spray guns. Most of our customers are spraying lacquer or other non-wiping stains, but this setup will work for most finishes. If you're not sure if this set up will work for you, reference the table below to determine what you may like instead.
| Size (MM) | Fluid Set | Nozzle | Needle | Air Cap(* Multi-Hole) | General Material to be Sprayed |
|---|---|---|---|---|---|
| 0.5 | 22201 | 22115 | 22101 | 22140* | DYES AND INKS |
| 0.7 | 22202 | 22116 | 22102 | 22141* Recommended | WATER BORN URETHANES, LACQUERS, NON-WIPING STAINS |
| 1.0 | 22203 | 22117 | 22103 | 22130 | WATER BORN |
| - | - | - | - | 22142* | FINE FINISH WORK |
| 1.2 | 22204 | 22118 Recommended | 22104 Recommended | 22131 | LACQUERS, VARNISH, PRIMERS, ENAMELS, STAINS, EPOXIES AND URETHANE. FINE FINISH WORK |
| 1.4 | 22205 | 22119 | 22105 | 22132 | LACQUERS, VARNISH, PRIMERS, ENAMELS, STAINS, EPOXIES AND URETHANES |
| 1.6 | 22206 | 22120 | 22106 | 22133 | INDUSTRIAL FINISHES - HIGHER OUTPUT |
| 1.8 | 22207 | 22121 | 22107 | 22134 | INDUSTRIAL FINISHES - HIGHER OUTPUT |
| 2.0 | 22208 | 22122 | 22108 | 22135 | DOPES, LATEX PAINT AND WAX BASED STRIPPERS |
| 2.4 | 22209 | 22123 | 22109 | 22136 | LATEX PAINT - WAXED BASED STRIPPERS |
| 2.8 | 22210 | 22124 | 22110 | 22137 | LATEX PAINT - WAXED BASED STRIPPERS |
